Pump Control Boxes & Drives

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin Control Box 1 hp 230V single phase controls are designed and optimized for Franklin Electric motors but work on almost any motor matching the basic parameters. The controls are an integral part of a submersible motor power system

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

This control box is being phased out for model # 2823008110 Franklin Electric Standard Control Box 1.5 hp 230V

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin Electric Standard Control Box 1.5 hp 230V for all motors new and old.

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin Control Box 1/2 hp 115V for three wire pumps Franklin single phase controls are designed and optimized for Franklin Electric motors but work on almost any motor matching the basic parameters

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin Control Box 1/2 hp 230V Franklin single phase controls are designed and optimized for Franklin Electric motors but work on almost any motor matching the basic parameters. The controls are an integral part of a submersible motor power system

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin Electric Control Box 1/3 or .33 hp in 115V Franklin single phase controls are designed and optimized for Franklin Electric motors but work on almost any motor matching the basic parameters

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin Electric Control Box 1/3 or .33 hp in 230V Franklin single phase controls are designed and optimized for Franklin Electric motors but work on almost any motor matching the basic parameters

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin Control Box 3/4 hp 230V Franklin single phase controls are designed and optimized for Franklin Electric motors but work on almost any motor matching the basic parameters. The controls are an integral part of a submersible motor power system

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Pumptec Plus Control Box designed for 1/2 to 5 hp single-phase submersible pump motors by Franklin Electric

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Made for Franklin QD Control Boxes, the Pumptec device monitors the pumps motor load and power supply and will automatically shut off the motor when a fault is detected. Such as low-flow wells, pump damage, clogging, dry well, or power mishaps, outages

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin Inline Pump Pressure Controller Model SWC, 115v 1/2hp to 3/4hp, 230v 1/2hp to 2hp, 16 amp Max,1"FNPT Connections, Use with a pressurized water supply or suction lift application, municipal and wells. The SWC Inline controller is a flow activated

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Pumptec Control Box by Franklin New Part # 5800020610 (old part Number 5800020601)

• By: Franklin Electric
• Low Stock: Ships in 1 - 2 weeks

Franklin's SubDrive 20 Pump Controller Nema3 with FE Connect, runs 3 phase and single phase motors, Learn more

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin's SubDrive 30 Pump Controller Nema3 Enclosure with FE Connect, runs 3 phase and single phase motors, Learn more

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin SubDrive Utility for 2-Wire Pumps with 115volt 1/3hp to 1/2hp Motors and 230volt Pumps with 1/2hp to 1 1/2hp Motors, Model UT2W

• By: Franklin Electric
• In Stock: Ships in 1 - 3 days

Franklin SubDrive Utility for 3 Wire Pumps 1/2 hp 115volt and 1/2hp to 1.5hp with 1ph & 1/2hp up to 2hp with 3ph, 230volt motors, Requiring only a small pressure tank in most applications, a very compact footprint compared to traditional water systems...

• In Stock: Ships in 1 - 3 days

Goulds Aquavar SOLO 2™ 1AS15, 1/2 to 2HP, 230V, 2 & 3 Wire, Single Phase, Constant Pressure Controller

• Availability: By Phone & E-Mail

The Grudfos CU 200 control unit is a combined status, control and communication unit for the SQFlex system. Communication between the CU 200 and the pump takes place via the pump power supply cable. No extra cables between the CU 200 and the pump are requ

• By: Grundfos
• Availability: By Phone & E-Mail

Grundfos CU301 MKII SQE Constant Pressure Pump Controller with Pressure Sensor / Transducer, Instructions, manual and warranty Part # 96438895

• By: Grundfos
• In Stock: Ships in 1 - 3 days

Grundfos Control Box 1/2hp, 230Volt Single Phase for three wire pumps SA-SPM6

• By: Grundfos
• In Stock: Ships in 1 - 3 days

Grundfos Control Box 1.0hp, 230Volt Single Phase for three wire pumps SA-SPM6

• By: Grundfos
• In Stock: Ships in 1 - 3 days

Grundfos Control Box 3/4hp, 230Volt Single Phase for three wire pumps SA-SPM6

• In Stock: Ships in 1 - 3 days

Square D, Surge and Lightening Protection, Type 1 rated devices provide the flexibility to be used with or without an Overcurrent Protection Device (OCPD)

• By: Franklin Electric
• Availability: By Phone & E-Mail

This version is currently Unavailable, Franklin SubDrive Utility for 2-Wire Pumps with 115volt 1/3hp to 1/2hp Motors and 230volt Pumps with 1/2hp to 1 1/2hp Motors, Model UT2W

• By: Franklin Electric
• Availability: By Phone & E-Mail

*This drive has been replaced by the New SubDrive Utility for 3 Wire Pumps.... Franklin Electric's MonoDrive Utility for 3 Wire Pumps from 1/2 to 2HP, constant pressure controller

• By: Franklin Electric
• Availability: By Phone & E-Mail

This drive has been discontinued and replaced with the subdrive20 connect or Utility Drive for 3 Wire Pumps!

• By: Franklin Electric
• Availability: By Phone & E-Mail

This item has been replaced with the MonoDrive Utility Drive... MonoDrive XT works with 1.5 and 2hp motors and is the biggest technological advance in the constant pressure arena. MonoDrive is designed to provide constant pressure for single-phase, three

• By: Franklin Electric
• Availability: By Phone & E-Mail

This drive has been replaced with the SubDrive 20 Franklin's SubDrive 15 Pump Controller Nema3 with FE Connect, runs 3 phase and 1 phase motors, Learn more

• By: Franklin Electric
• Availability: By Phone & E-Mail

*replaced by the Utility 2 Wire Drive, see our other listing* The new SubDrive for 2 wire pumps, works with 1/2hp 3/4hp and 1hp motors and is the biggest technological advance in the constant pressure arena. SubDrive is designed to provide constant pressu

• By: Franklin Electric
• Availability: By Phone & E-Mail

This Drive has been replaced by the new SubDrive 15 and SubDrive 20 please see our other listings for more information