AquaSulis EE Series Twin Alternating Water Softener and Conditioner

AquaSulis Twin Alternating Series Water Softener System

Never run out of soft water with a twin alternating softener. One tank is always live with the second tank in either stand-by mode or regenerating. Ideally suited for large buildings and high volume services, homes, restaurants, motels, and pre-treatment for commercial reverse osmosis systems. High hardness can be more efficiently handled with two small tanks than it can with one very large tank, in terms of both salt and water savings.

Clack has made some of the biggest advancements in water softening in the last 25 years in terms of rugged reliable equiptment. These made in North America systems are dependable, efficent and longlasting.

Features and Benefits

• Endless Soft Water on demand 24/7
• Solid state microprocessor with easy access front panel settings
• Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer), and Tank in Service Indication
• Four methods to initiate regeneration; meter immediate, meter delayed, time clock, delayed or pressure differential
• Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency
• Adjustable cycle times with 6-cycle control delivers controlled backwash, downflow brining/slow rinse, second backwash, fast rinse, refill and downflow service
• Coin Cell Lithium battery back-up with a 8 hour carry over
• Backwash and brining ability to 21” diameter tanks
• Downflow brining regeneration
• Level VI 15-volt output DC power supply provides safe and easy installation
• Treated/Soft water post fill and regeneration cycles
• Reliable and proven DC drives
• One piece expanding seal spacer stack assembly
• Linearly reciprocating piston operation

Resource Information Links

• Clack WS1 EE Twin Spec Sheet
• Start Up Proceedure

What's in the Box

• One Moslty Assembled System*
• Clack WS1 EE Twin Alt Series Metered Control Valve
• Matching Dual By-Pass Valve
• Your Choice of many Plumbing Connectors
• Two Clack or Pentair Structural Poly Glass Mineral Tanks - Black
• Round Brine Tank, 18" Diamter by 34" High, Black
• High Efficiency 8% or 10% Crosslinked Cation Resin - *10% for chlorinated water supplies
• Riser Rod with Upper and Lower Baskets
• Full Sized Printed Manual

Warranty

• 5 years on the complete control valve
• 10 years on the mineral tanks
• Warrantied for manufactures defects

Support

• Free Phone & Email Support
• System Sizing
• Installation Help
• Programing Assistance

Available Sizes

• 60K - Capacity, Two x 1.0 cuft, 9" Diameter by 48" Tall Mineral Tanks
• 90K - Capacity, Two x 1.5 cuft, 10" Diameter by 54" Tall Mineral Tanks
• 120K - Capacity, Two 1.5 cuft, 12" Diameter by 52" Tall Mineral Tanks
• 150K - Capacity, Two x 2.5 cuft, 13" Diameter by 54" Tall Mineral Tanks
• 180K - Capacity, Two x 3.0 cuft, 14" Diameter by 65" Tall Mineral Tanks
• The valve head adds another 7" in height to each tank
• Smaller & larger systems are available, commercial ones too, please inquire with your specific needs

Softening Resin

We use 8% Cation resin simply because its the most efficient media for normal water softening requirements including well water. If you are on a chlorinated, municipal or city water supply select the 10% Cation Resin as it is more chemical resistant than 8%.

Please direct any questions or water reports you have to us so we can help you choose the right size and system for your service & water.

*Shipping

Addresses with two zeros in thier postal code or remote lacations may require an additional shipping charge or we can sometimes break down the smaller sized system into a few boxes and ship it via courier instead of ltl on a truck. Larger systems will all ship on a pallet, LTL. Call or write to find out more about a system delivery.

The right system & the right size:

A resin-based exchange system that uses sodium is still the most effective way to remove hardness (calcium & magnesium) from your water supply. They can also remove  ferrous iron and colloidal manganese.

There are a few things to consider when selecting your systems size.

A proper chemical analisis of your water. Do you already have a water test or know your water content? Send it along to us and we can size the system with you.

Peak service flow rate, what is your maximum flow rate?

Don't know your flow rate... Fixture counts are a practical way when you have the endless water supply, well-pumping systems often are the limiting factor and if youre not sure a simple bucket test using a short garden hose from your tank tee/manifold, outside tap or yard hydrant will work great.

Capacity, in a home this is your family size, in a motel its your max occupency, in a restaraunt it could be dishwasher loads, ro pre-treatment is your concentrate, pereate and your flush water. Let us help you find your size.

If you have ferric iron, high iron, high manganese, and or H2S Hydrogen Sulphide, contact us with the details and we can find the right variation or supplemental system for you.

Additional Options:

Clack has made some really great additional options for this valve, including, a verticle by-pass adapter which allows you to shorten the installation room needed and position the by-pass valve either pointing up or down. The is also a mixing or blending valve available for those that need to blend some hardness back into the water supply.