AquaSulis PRO P 75 GPD 4 Stage Reverse Osmosis System with Booster Pump

AquaSulis PRO P 75 Gallon per Day 4 Stage Reverse Osmosis System with Built-In Booster Pump

Complete with an installation kit and your choice of designer faucet to match your kitchen. If your TDS is above 1000 or suffer from low house pressure in general, this is the model for you. Our Aquatec Booster pump will make this ro perform like the pro's.

Good water has never been easier than with an AquaSulis Pro P 75 Reverse Osmosis System. This made in North America reverse osmosis system features industry standard components. Unlike proprietary systems, all of the parts, components, filters and membrane are the most widley available and economical ones to be found. This also allows one to easily customize the system to match your water or expand it to match your usage.

Reverse Osmosis is the most effective and economical way to provide your family with the highest quality of drinking water from any source!

Stage 1 - 5 Micron Polypropylene Sediment Filter, by Suez

Stage 2 - Coconut Carbon Pre-Carbon Filter, by Matrix or Omnipure

Stage 3 - 75 Gallon Per Day Membrane (made in USA)

Stage 4 - Coconut Carbon Post Filter, by Matrix or Omnipure

Pure Water Storage in a 4.5 gallon/ 18 Litre AquaSky NSF RO Storage Tank (2.5 useable gallons on demand)

Your choice of Chrome or Brushed Nickel Designer Faucet by Proflo, or Matte Black by EMP. Stainless Steel & Lead Free Brass Construction, Ceramic Valve

Aquatec 8800 Booster Pump & Pressure Switch (fully installed)

John Guest Fittings & Food Grade Tubing

High Flow 3/8" Tank and Tap Connections

Model ASPRO75RO-P

Installation:

A complete installation kit is included with every system, JG Feed Valve, Saddle Valve, Faucet Fitting, Tubing.

This model has a pump and it needs a standard 115v North American Outlet to plug into.

An instruction booklet is included

You will need a few simple hand tools and a drill (if you are mounting a tap on in a sink area, not if this is just being connected to a fridge)

Our staff are avialble by phone or email to help with any installation questions and guidence you may need.

Operating Recomendations:

Maximum Total Dissolved Solid TFC Membrane 2,000 ppm
Water Temperature Range 40-95ºF
Water Pressure Range 40-80 psi (a pressure regulator is recommended)
Working pH Range 4.0 to 11
Maximum Manganese 0.05ppm - (exceeding these levels will shorten the membranes life)
Maximum Iron  0.1ppm - (exceeding these levels will shorten the membranes life)
Hydrogen Sulfide should not be present - (carbon pre-filters can be used to reove H2s before the membrane)
The water source should be bacteria free/ potable water