Pressure Limiting Valve 50 psi 1/4" FG Fittings Apex FiltaMate Part # FMP-50PSI-1/4

Apex Valves FiltaMate® - 50 PSI Pressure Limiting Valve with 1/4" John Guest Quick Connect Fittings Part # FMP-50PSI-1/4

Applications:

• Use on high pressure water systems to protect downstream components, like; Water filters, drink dispensers, ice makers, coffee machines, coolers and reverse osmosis systems.
• Motor homes, campers and trailers where a connection is made directly to a water main.

Benefits

• Protect your equipment from leaks and costly repairs due to extreme pressures and spikes
• Integral dual check valves help prevent back flow
• FiltaMate resists water hammering

Specifications

• Inlet: 1/4" John Guest Quick Connector
• Outlet: 1/4" John Guest Quick Connector
• Over All Length: 98mm
• Check Valve: Yes, Dual
• Max Flow rate: 4 Gallons per min / 14 Litres per min (4usgpm) at 700 kPa (100psi) inlet pressure
• Outlet pressures: 50 psi +- 10% @ 1000kPa / (1 50psi)
• Pressure ratio:1 0:1 (for every 1 0kPa(1 .spsi) increase in inlet pressure
• above 1000kPa(150psi), the outlet pressure will increase by lkPa(o.145psi)
• Maximum inlet pressure: 230 psi / 1600kPa
• Maximum temperature: 40'C / 105"F
• Minimum temperature: 1'C / 34'F
• Construction Materials: Acetyl plastic

Installation Notes
.

• All pipe work should be flushed prior to installation
• Do not apply heat near valve during installation
• Must be flitted downstream of approved isolating valve
• Install in the direction as indicated by the flow arrow
• Warranty is limited to any fault found in a valve due to poor workmanship or materials that is returned to Apex Valves Ltd within 1 year from the date of manufacture.

The Filtamate valve opens and closes automatically every time water is drawn through it. As it is a mechanical device we recomend that it is replaced every 5 years or sooner in high usage installations.