PuROTwist 50gpd Reverse Osmosis System Part # PT4000T50-SS

PuROTwist 4000 50gpd 4 Stage Reverse Osmosis System

Features:

• Will reduce or remove the following contaminants, Barium, Cadmium, Chlorine, Chromium III, Chromium VI, Copper, Fluoride, Lead, Mercury, Nitrate, Radium, Selenium, TDS (total dissolved solids)
• Easy to install, even easier to maintain
• 3/8” Tubing from the tank to the faucet
• Quick Twist Omnipure filters & membrane
• Lead-Free Standard Chrome Faucet
• The compact design fits easily under the kitchen sink area, and can also be installed in the basement!

What's in the box?

• This is a complete system with installation kit, there is nothing else to purchase. The only other thing you'll need are a few small hand tools and a couple hours of your time.
• Click here to see a PDF file copy of the full installation manual.

Specifications:

• # 1 Filter: Omnipure Q5605 - 5 Micron Sediment
• # 2 Filter: Omnipure Q5633 - Carbon Block
• # 3 Filter,: Omnipure TQ56-50 Membrane
• # 4 Filter: Omnipure Q5633 - Post Carbon GAC
• Steel 4.4 Gallon Storage Tank
• Pressure Requirement: 30-100 psi
• Temperature: 40ºF to 100ºF (4ºC to 38ºC)
• Can handle up to 2000ppm TDS
• Made in the USA

Replacement Filters & Membranes:

• PuROtwist filters should be changed every 6 - 12 months depending on the incoming water conditions and overall usage. Membranes are changed anywhere from 2 to 4 years.
• Click on the "Related Products" tab above to see the replacement filters and membranes.