Sensafe/WaterWorks Copper (Johns) Test Kit 25 Strips Part # 480042

John's Copper Test Kit for Water Quality Testing by SenSafe - WaterWorks

This water quality test is the practical alternative to wet chemical copper tests for several reasons: There are no hazardous chemicals to mix (an MSDS is not required); Quick results are obtained in less than 1 minute; No identified interferences; And, best of all, the Copper water quality test strips are safe and easy to use for fast accurate results within the ranges of 0 to 2 ppm (mg/L), which permits the measurement of typical copper levels found in well, tap, and stream water...

Testing Proceedure:

• Collect a fresh water sample of at least  200ml (or 1 cup)
• Dip test strip into sample for 15 seconds and move it with constant back and forth motion
• Remove the test strip and shake it once briskly and remove excess water
• Wait 30 seconds and look through the pad window to match the color against the color chart
• The test window will complelty color before 60 seconds.

Features & Specifications:

• Copper Check (John's)
• Part Number: 480042
• Detection Range: 0, 0.05, 0.1, 0.2, 0.4, 1, 2 ppm (mg/L)
• Total Test Time: 45 Seconds
• Number of Tests: Bottle of 25
• Sugested Retail Price: $13.99
• Made in the USA by ITS, WaterWorks, Sensafe