Submersible Pump Flow Sleeve Protector - Up to 4" Pump x 2" Pipe

Submersible Pump & Motor Flow Sleeve Protector

Well pumps are designed to draw water past the motor when running. Overheating problems are largely due to failing to install the pump as per the manufacturer's specifications. Pump manufacturers list cooling requirements which specify a minimum water flow over the motor to achieve proper cooling.

The flow sleeve forces the water flow over the motor, creating the correct amount of cooling needed for the motor. Ideal uses are when submerged pumps are installed in storage tank, lakes, cisterns, ponds, water wells, and aeration systems.

• Pumps & Motors from 3" to 4"
• Water Lines/Pipe from 1" to 2" max.
• Includes discharge pipe cover, motor center, wire grommet and stainless steel hardware

*From the drop down you can add a piece of 4" PVC Pipe which you will need to complete the kit, or you can get this piece locally.

** From the drop down menu you can also add a Leg Kit/Pump Stand Kit, (these are sold per leg, one per kit)